Lever Return : Anti-sag mechanism with independent lever return springs to prevent lever sag
Handing : Non-Handed – Completely reversible
Backset & Latchface : 2 3/4″ backset with 1 1/8″ x 2 1/4″ latchface, 2 3/8″ backset is available with 1″ x 2 1/4″ latchface both with self adjusting front for square or beveled edge doors
Latchbolt : Stainless Steel Latch bolt with 1/2″ projection, Deadlocking on keyed functions & exit latch
Cylinder: 6 Pin Brass Cylinder, Schlage classic C Keyway, with 2 Keys
Strikes: 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available when specified
Door Preparation : ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
Door Thickness : Factory Set for 1 3/4″ Door thickness – 1 3/8″ require shims, can be adjusted to fit up to 2″ thick
