Design Hardware X - Series Grade 1 Cylindrical Lockset and Latchset C Lever (Curved) ADA Lever Handle Schlage "C" Keyway

Regular price $115.00

Shipping calculated at checkout.

  • Picture to show lever design only - finish is dependent upon your choice
  • ANSI : Meets & Exceeds ANSI – A156.2, Series 4000, Grade 1 Standards
  • UL Listings : UL Listed for “A” Label 3 Hour Fire Doors
  • ADA Compliance : Meets ADA and ANSI A117.1 accessibility codes
  • Lock Chassis : Steel, Zinc dichromated chassis for Corrosion Resistance
  • Clutching : Clutching levers standard for Vandal resistance on locking functions
  • Trim : 5″ Solid zinc diecast levers, 3 3/8″ wrought brass roses
  • Lever Return : Anti-sag mechanism with independent lever return springs to prevent lever sag
  • Handing : Non-Handed – Completely reversible 
  • Backset & Latchface : 2 3/4″ backset  with 1 1/8″ x 2 1/4″ latchface, 2 3/8″ backset is available with 1″ x 2 1/4″ latchface both with self adjusting front for square or beveled edge doors
  • Latchbolt : Stainless Steel Latch bolt with 1/2″ projection, Deadlocking on keyed functions & exit latch
  • Cylinder: 6 Pin Brass Cylinder, Schlage classic C Keyway, with 2 Keys 
  • Strikes: 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available when specified
  • Door Preparation : ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
  • Door Thickness : Factory Set for 1 3/4″ Door thickness – 1 3/8″ require shims, can be adjusted to fit up to 2″ thick
  • Lever Design: Curved
  • US26D Finish Brush Chrome 626
  • US10B Finish Oil Rubbed Bronze 613
  • US3 PVD Finish Bright (Polished) Brass Physical Vapor Deposition 
  • US4 Finish Satin (Dull) Brass 606
  • Fasteners: Combination screws for wood or metal doors & frames
  • Warranty : Manufacturer Limited Lifetime Warranty