Command Access CRU Current Reduction Module

Regular price $37.00

Shipping calculated at checkout.

The Command Access CRU3 is the latest current reduction module redesigned with a smaller footprint and energy improvements to work more efficiently with low current DC voltage electric locking devices such as cylindrical locks, mortise locks, panic trim or strikes that are being used in a “fail safe” or “unlock cycle” condition. When energized, the Command Access CRU3 allows the device to receive full current long enough for the solenoid to retract. Once retracted, the Command Access CRU3 limits the current for the solenoid to remain retracted as long as is needed. While limiting the current, the Command Access CRU3 sends an occasional high frequency pulse to ensure that there are no “re-locking” issues. This prevents failures due to door misalignment or prolonged lever engagement by the users. Our new 50% mode makes powering a 12V solenoid with a 24V power supply a breeze!

  • Helps increase solenoid life
  • Solves "warm" levers of EL (Fail Safe) openings
  • Holding Current as low as 40 MA
  • Helps improve operating efficiency for continuous duty applications
  • Significant energy savings when used in continuous duty applications
  • Reduced flash back spark through smart filtering to improve relay life
  • Operate a 12VDC solenoid w/ 24VDC power supply
  • Voltage:
    • Voltage range – 12 to 30 VDC
    • Maximum Amperage - 2A
    • Non-polarized input/output
    • 50% power setting using 24VDC PS w/ a 12V lock
  • Recommended Locking Hardware:
    • All Mortise & Cylindrical Locks
    • All Exit Device trim